In the middle of that part is a screw. Remove it and the long vent piece will move out of the way enough to access the connectors. The connectors are mostly hidden by a metal housing that will move once you remove a bolt in the front middle. I think its 12mm. Once you have more room to work with, you will be able to trace the cables all the way to the connector.
Thats where you will inject the turbo timer harness. Make sure you hear the click to ensure a good connection. While you're down there, ground the timer to the vehicle's chassis very important! Running the connection to the handbrake sensor isn't hard. There is no need to pull off the entire center console.
I found that the handbrake sensor wire is too short to manipulate at the handbrake itself, so its easier and more convenient to 'tap' into it right next to the shifter. On the passenger side will be a small loom cable. Open it up and look for the yellow wire with brown stripe. Thats the one you need. The Apex Timer came with a splice kit to tap into the wire without actually cutting it.
Use pliers and you will feel the click when its properly closed. Use the following procedures in order for the theft warning system to be set with the Turbo Timer ON. NOTE: If the vehicle has an automatic transmission it will be necessary to disconnect the key lock solenoid connector. Disconnect negative - side terminal from battery. Pull back the carpet on passenger's side floor and remove board to uncover ECU. The theft warning control unit is located above the and to the right of the ECU.
Remove the theft warning control unit it may be necessary to remove ECU and other components first. Disconnect the 16 pin connector from the theft warning control unit. Reconnect the negative - side terminal of the battery temporarily and use a voltage meter between pin 3 and chassis ground for battery voltage with the ignition switch in the ACC and ON position and 0 voltage in the OFF position.
HKS also makes it simple to update since this is compatible with previous generation harness as well! Hand brake detection sensor for safety.
Single button activation and display. Compatible with previous generation harnesses! Availability and Condition: Unless otherwise noted, this product is in brand new condition and usually in stock at one of our warehouses, or will ship directly from the manufacturer. Loading Featured Parts for your.
The link bellow will drop you to the same Hks Turbo Timer X but for a different car. Shop with Confidence. Payment Options. Have Questions? Call or email us for prompt and friendly help. Phone: , Email: customercare proimporttuners. All Rights Reserved. January 13th, Contact Us.
0コメント